STYLE: SRC
SRC is a single internal cartridge mounted rotary seal designed for general service applications.
Filter By
Filter By
STYLE: RBD
RBD is a stationary design multiple spring double seal used where leakage of hazardous or costly products cannot be tolerated and where positive lubrication without product dilution is required.
STYLE: LTC
Low Temperature Cartridge is a single non-pusher, rotating welded metal cartridge design. The rugged design is great for handling the extremes of high temperatures.
The edge welded cartridge design has the...
STYLE: HOS
HOS is a balanced single spring rotary seal capable of handling conditions much higher than conventional single spring designs.
STYLE: HTC
HTC is a cartridge metal bellows seal using grafoil secondary seals to handle elevated temperatures without any adverse effects.
STYLE: ESD
ESD is a back-to-back multiple seal designed for application where positive lubrication is required from an external flush without dilution of the product.
Since all metal parts are isolated and the pumped...
STYLE: DTP
The Dual Rotary Pumper (DRP) is a cartridge-mounted mechanical seal that facilitates impeller adjustments, reduces power consumption, and maintains interfacial lubrication. It fits standard ANSI sizes, has...
STYLE: DTP
DTP is a multiple, cartridge-mounted mechanical seal. Rugged and dependable, the DTP is ideal for closed-loop convection cooling systems. With the DTP being reciprocally balanced, it offers a higher...
STYLE: DRC
DRC is a multiple cartridge mounted rotary seal designed to be easily adapted to difficult-to-fit equipment.
STYLE:CGS
Cartridge Grease Seal is an innovative mechanical seal mounted on a single cartridge and can replace double seals without needing a water flush. It has a distinctive characteristic that sets it apart from...
STYLE: BSS
The BSS is a rotary designed, balanced, single spring seal capable of handling higher operating pressures than conventional unbalanced single spring designs. Large coil springs are resistant to clogging and...
Made of 100% PTFE material, Flexible Lantern Material is an innovative approach to standard lantern rings, Flexible Lantern Material is easier to install and remove.
Sold in roll form like bulk packing, flexible...
STYLE: ML5707
ML5707 PTFE fibers are treated with a PTFE dispersion which fills and seals all voids in the packing body. After braiding, a PTFE coating is applied. This packing will not wick making it an excellent...
STYLE: ML5740HC
Finely ground particles of the highest quality graphite in a PTFE matrix to control graphite migration. It is effective in all equipment, including pumps, hydra-pulpers, and valves.
STYLE: ML5701U
Multi-Lok braided graphite packing made from graphite fibers with a minimum of 99% carbon and a maximum of 1% ash. This dispersion coating of graphite does not contain any hydrocarbon, PTFE, or any...
STYLE: ML8911W
Multi-Lok braided graphite foil packing. No added lubricants or binders to cook out or become brittle. The foil is made from a natural lubricant (graphite). Each strand of yarn prior to braiding is...
STYLE: ML8201W
ML8201W flexible graphite packing with Inconel wire inserted.
STYLE: ML8201
Pure homogenous graphite bonded to a fiberglass carrier for strength and thermal stability. It has no added lubricants or binders to cook out or become brittle.
STYLE: SB2028
Braided carbon yarn with Inconel wire inserted over a pliable homogeneous core of material. The braid is made from a high temperature, Inconel wire inserted yarn. The finished packing is treated with a...
STYLE: SB5715
Use this specially treated PTFE packing where economy, high wet strength, low abrasion and low friction are required. Recommended for shafts and sleeves and is an appropriate choice for stern tubes on...
STYLE: ML5715
ML5715 is a general purpose packing with a reinforced special blend of fibers. Thoroughly impregnated with PTFE suspension.
STYLE: ML8622
ML8622 fugitive emissions packing is certified API 622 emission compliant. ML8622 is recommended for high-temperature valves and pressure vessels. It performs well in high-temperature, high-pressure...
STYLE: ML5706FDA
ML5706FDA complies with the FDA and USDA requirements under Title 21 Food and Drugs, 178.2570, Lubricants with Incidental Food Contact, 177.1550, Perfluorocarbon Resins. ML2236FDA contains only...
STYLE: 2004
This packing is manufactured from soft ribbons of special alloy lead foil. It has a twisted and crimped construction, with each layer of the foil thoroughly lubricated and graphited.
STYLE: ML8574
Multi-Lok packing is made of continuous filament polyimide and PTFE fibers that are impregnated with PTFE dispersion during the braiding process. It is abrasion resistant and great for pumping process...
STYLE: ML5728
The special impregnation procedure fills all voids throughout the body of the packing with PTFE dispersion. A superior general purpose packing for tougher-than-normal applications.
STYLE: ML5726
ML5726 is a Multi-Lok braid of special proprietary blend of Tek-Pro fibers, treated with a specially formulated blend of low-friction lubricants. Each strand is individually coated with a special grade...
STYLE: ML8220
ML8220 provides a softer and more flexible packing with shaft speeds up to 3,300 feet per minute (fpm). It performs well in color-sensitive environments.
ML8220 complies with the FDA and USDA...
STYLE: ML5708
Unlike other PTFE fluorocarbon filament packing, ML5708 fibers are prelubricated to provide a softer, more flexible packing, with improved peripheral speed characteristics and exothermic properties.
No...
