STYLE: GR64A
This nuclear grade 99.5% pure graphite ribbon with pressure sensitive adhesive (PSA) backing is self lubricating, corrosive resistant, and dimensionally stable at all temperatures. Ribbon-Pack is easy to...
Filter By
Filter By
STYLE: GR64
This nuclear grade 99.5% pure graphite ribbon is self lubricating, corrosive resistant, and stable at all temperatures. Ribbon-Pack is easy to install, withstands high pressures and dissipates heat....
STYLE: GBSST
Mechanical Grade Graphite Sheet with .004″ 316 Stainless Steel Tang Inserted Laminate
STYLE: GSBSS
Mechanical grade (industrial standard) graphite sheet, adhesively bonded to .002″, 316 stainless steel sheet insert.
STYLE: GSB
Mechanical grade 99.0% pure graphite sheet has no binders or resins. Resistant to a wide range of temperatures, pressures, and pH levels. Low creep relaxation and seals under a moderate bolt load.
STYLE: GR63A
This mechanical grade 99.0% pure graphite ribbon with pressure sensitive adhesive (PSA) backing is self lubricating, corrosive resistant, and dimensionally stable at all temperatures. Ribbon-Pack is easy...
STYLE: GR630
This mechanical grade 99.0% pure graphite ribbon is self-lubricating, corrosive resistant, and stable at all temperatures. Ribbon-Pack is easy to install, withstands high pressures and dissipates heat....
STYLE: GP200
Compressed sheet utilizes a 0.0005″ thick polyester insert for ease of handling with a 90% minimum graphite content. This design allows full size sheets to be rolled and shipped in tubes. This reduces the...
STYLE: GS500
Manufactured from 98% minimum pure graphite with a 0.002″ thick 316 stainless steel insert that reduces gasket handling damage and increases pressure resistance. No binders or resins to cook out and will...
STYLE: EXP-TB
The EXP-TB is designed for steam turbines. The design coalesces and expels steam before it reaches the bearing housing.
STYLE: EXP-PB
EXP-PB includes all the benefits of a standard EXP with an adaptation to mount within the existing LER/LOR ring grooves of split pillow blocks.
STYLE: EXP-GB
EXP-GB is designed for applications where a positive seal is required because of flooded conditions. A positive seal is created within the EXP with no parts to wear on your shaft. Common applications are...
STYLE: EXP-FL
EXP-FL includes all the benefits of a standard EXP with the adaptation for flange mounted applications where pressing the stator is not recommended or possible.
STYLE: EXP
EXP is a true non-contact bearing isolator that utilizes a dual expeller to create centrifugal force and drive away contamination. Statically, EXP utilizes dual vertical oriented chambers to form the most...
STYLE: Heliflow
Heliflow is a unique type of shell and tube heat exchanger. The tubes in the Heliflow are arranged in parallel, starting with an inlet manifold on one end, and terminating at an outlet manifold on the...
STYLE: SDF
SDF saves resources and extends seal life. The dual flow flow meter is the ideal partners for applications requiring uninterrupted seal water flow for cooling and lubrication. The model is compatible with...
STYLE: SSF
SSF sealing liquid monitor is designed for applications where uninterrupted seal water flow is required. Adequate seal water flow for cooling and lubrication results in water savings, energy savings,...
STYLE: A1C
Designed for light to medium duty services in ANSI plans 7352 and 7353 for the chemical, food, pharmaceutical, pulp and paper, water and waste treatment, and general industry
STYLE: SAS-S
Abrasive separators provide a simple yet extremely effective method of keeping dirt and other abrasives from the sealing faces. A method that can increase seal or pacing life many times over to greatly...
STYLE: SAS-N
Abrasive separators provide a simple yet extremely effective method of keeping dirt and other abrasives from the sealing faces. A method that can increase seal or pacing life many times over to greatly...
STYLE: SAS-P
With two shaft-supporting bushings and a lantern ring, the SAS-P is a noncontact tandem seal that uses air to seal and water to flush and clean the stuffing box/seal chamber. The seal is impervious to...
STYLE: SAS
SAS is an engineered pneumatic sealing system designed to seal the shafts of equipment where typical contact seals such as packing and/or mechanical face seals prove to be too costly to operate and maintain
STYLE: TJS
TJS is a single rotary unit designed to mount internally on large rotating equipment like pressure screens where component seal design is required.
STYLE: SRS
SRS is a single internal component mounted rotary seal designed for general service applications.
STYLE: SMD
SMD is a heavy-duty multiple-component seal that mounts externally and can be designed to handle up to 1/4″ shaft deflection and 1/8″ end-play making it ideal for use on agitators, mixers, reactors,...
STYLE: OSS
OSS is an externally mounted single spring component seal capable of handling up to 1/4″ shaft deflection and 1/8″ end-play. This makes it ideal for positive displacement pumps, augers, mixers, agitators...
STYLE: OMS
OMS is an externally mounted single component seal capable of handling up to 1/4″ shaft deflection. This makes it ideal for use on augers, belt driven pumps, mixers, agitators and slow moving rotating...
STYLE: LTB
Low Temperature Bellow is a single non-pusher, rotating welded metal bellows design. The rugged design is great for handling the extremes of low temperatures. The edge welded bellows design has the...
STYLE: VSR
VSR is a single, external cartridge-mounted rotary seal design for installations where shaft deflection exceeds the limits allowed by off-the-shelf cartridge seals.
STYLE: UMC
UMC is a stationary design multiple spring double seal used where leakage of hazardous or costly products cannot be tolerated and where positive lubrication without product dilution is required.
